Butt Weld 90° Elbow
A Butt Weld 90° Elbow is a standard pipe fitting used to change the direction of flow in a piping system by 90 degrees while connecting two sections of pipe via direct butt welding. Core Definition & Connection Butt Weld (BW): The fitting’s ends are precision-beveled to match the pipe’s wall thickness, enabling full penetration welding directly to the pipe ends.This creates a permanent, leak-proof, high-strength joint that acts as an integral part of the pipeline.Primarily used for same-size pipes (equal-diameter elbows); reducing (concentric/eccentric) versions are also available for connecting different pipe sizes. Key Types (Radius) Long Radius (LR): Centerline radius = 1.5 × Nominal Pipe Diameter (1.5D).Smoother flow, lower pressure drop, less turbulence.Most common for general industrial use.Short Radius (SR): Centerline radius = 1.0 × Nominal Pipe Diameter (1.0D).Compact, for tight spaces.Higher pressure loss. Common Materials Carbon Steel: ASTM A234 WPB (most widely used).Stainless Steel: ASTM A403 WP304, WP316L (corrosive environments).Alloy Steel: For high-temperature/pressure (e.g., power plants). Standards & Dimensions Standards: ASME B16.9, MSS SP-43, API, JIS, EN.Sizes: 1/2" to 80" (DN15 to DN2000).Wall Thickness: SCH 40 (STD), SCH 80 (XS), SCH 160, XXS. Typical Applications Oil & gas, petrochemical, refineriesPower generation (thermal, nuclear)Chemical processingBoiler and utility pipingShipbuilding, offshore platformsHigh-pressure/high-temperature pipelines Advantages Strong, rigid, leak-proof (no gaskets/threads).Full bore flow (minimal obstruction).High integrity for pressure/vacuum/corrosion.Smooth interior (reduces friction & buildup).Long service life under severe conditions. the butt weld 90° elbow is the primary, reliable fitting for sharp directional changes in heavy-duty piping systems worldwide.
If you need customized products, Contact US !
Products Category
Tag list
- 产品描述
-
A Butt Weld 90° Elbow is a standard pipe fitting used to change the direction of flow in a piping system by 90 degrees while connecting two sections of pipe via direct butt welding.
Core Definition & Connection
- Butt Weld (BW): The fitting’s ends are precision-beveled to match the pipe’s wall thickness, enabling full penetration welding directly to the pipe ends.
- This creates a permanent, leak-proof, high-strength joint that acts as an integral part of the pipeline.
- Primarily used for same-size pipes (equal-diameter elbows); reducing (concentric/eccentric) versions are also available for connecting different pipe sizes.
Key Types (Radius)
- Long Radius (LR): Centerline radius = 1.5 × Nominal Pipe Diameter (1.5D).
- Smoother flow, lower pressure drop, less turbulence.
- Most common for general industrial use.
- Short Radius (SR): Centerline radius = 1.0 × Nominal Pipe Diameter (1.0D).
- Compact, for tight spaces.
- Higher pressure loss.
Common Materials
- Carbon Steel: ASTM A234 WPB (most widely used).
- Stainless Steel: ASTM A403 WP304, WP316L (corrosive environments).
- Alloy Steel: For high-temperature/pressure (e.g., power plants).
Standards & Dimensions
- Standards: ASME B16.9, MSS SP-43, API, JIS, EN.
- Sizes: 1/2" to 80" (DN15 to DN2000).
- Wall Thickness: SCH 40 (STD), SCH 80 (XS), SCH 160, XXS.
Typical Applications
- Oil & gas, petrochemical, refineries
- Power generation (thermal, nuclear)
- Chemical processing
- Boiler and utility piping
- Shipbuilding, offshore platforms
- High-pressure/high-temperature pipelines
Advantages
- Strong, rigid, leak-proof (no gaskets/threads).
- Full bore flow (minimal obstruction).
- High integrity for pressure/vacuum/corrosion.
- Smooth interior (reduces friction & buildup).
- Long service life under severe conditions.
- the butt weld 90° elbow is the primary, reliable fitting for sharp directional changes in heavy-duty piping systems worldwide.
Butt Weld 90° Elbow
A Butt Weld 90° Elbow is a standard pipe fitting used to change the direction of flow in a piping system by 90 degrees while connecting two sections of pipe via direct butt welding. Core Definition & Connection Butt Weld (BW): The fitting’s ends are precision-beveled to match the pipe’s wall thickness, enabling full penetration welding directly to the pipe ends.This creates a permanent, leak-proof, high-strength joint that acts as an integral part of the pipeline.Primarily used for same-size pipes (equal-diameter elbows); reducing (concentric/eccentric) versions are also available for connecting different pipe sizes. Key Types (Radius) Long Radius (LR): Centerline radius = 1.5 × Nominal Pipe Diameter (1.5D).Smoother flow, lower pressure drop, less turbulence.Most common for general industrial use.Short Radius (SR): Centerline radius = 1.0 × Nominal Pipe Diameter (1.0D).Compact, for tight spaces.Higher pressure loss. Common Materials Carbon Steel: ASTM A234 WPB (most widely used).Stainless Steel: ASTM A403 WP304, WP316L (corrosive environments).Alloy Steel: For high-temperature/pressure (e.g., power plants). Standards & Dimensions Standards: ASME B16.9, MSS SP-43, API, JIS, EN.Sizes: 1/2" to 80" (DN15 to DN2000).Wall Thickness: SCH 40 (STD), SCH 80 (XS), SCH 160, XXS. Typical Applications Oil & gas, petrochemical, refineriesPower generation (thermal, nuclear)Chemical processingBoiler and utility pipingShipbuilding, offshore platformsHigh-pressure/high-temperature pipelines Advantages Strong, rigid, leak-proof (no gaskets/threads).Full bore flow (minimal obstruction).High integrity for pressure/vacuum/corrosion.Smooth interior (reduces friction & buildup).Long service life under severe conditions. the butt weld 90° elbow is the primary, reliable fitting for sharp directional changes in heavy-duty piping systems worldwide.
If you need customized products, Contact US !
Share to
Products Category
Tag list
Request a Quote
We will contact you within one working day. Please pay attention to your email.
Related Products
We look forward to working with you to jointly promote the development of China's pipeline equipment industry.
Phone/WhatsApp
Send E-mail
Leave Message
For more information, please leave your message below.
Main products: WN, SO, PL, BL flanges, elbows, tees, reducers, caps. Materials: carbon steel, stainless steel, alloy steel. Standards: ASME, ANSI, EN, JIS, DIN. Export to global pipeline projects. Contact Us